Equipment Name: Large vertical powder packaging machine
Product Description: Large vertical powder washing machine is also called powder packaging machine, powder - dt21jx packaging machine, powder automatic packaging machine, etc., the machine uses advanced PLC plus photoelectric control system, can automatically complete the measurement, bag making, Filling, sealing, cutting off, printing the date of production, the process of the mouth of Chase. The production line is fully automated and realizes product packaging line operations, improves the production efficiency of the company, and significantly reduces product costs.
Scope of application: Suitable for packaging powder, automatic packaging of powdery materials in pharmaceutical, food, cosmetics, chemical and other products, such as milk powder, bean flour, flour, protein powder, starch, seasoning powder, coffee powder, powder packaging machine, Health tea, glucose powder, pearl powder, soda powder and all other powders.
Product model: XJIV-6848-PA type
Technical points
1, the same servo motor control, screw metering, precision up to 1c / o.
2, adjust the product weight without any tools.
3, a wide range of applications: a certain degree of mobility powder, granular materials can be
4, automatic error correction, weight overload alarm, product count
Powder packaging machine packaging effect 
Powder packaging machine | powder quantitative packaging machine http://
Flour packing machine http://
Powder Packaging Machine | Powder Packaging Machine http://
Foliar fertilizer packaging machine http://
Automatic packaging machine http://
Packaging machine http://
Filling machine http://
Screw measuring machine technical parameters
Equipment features :
★ It is applicable to the quantitative filling and packaging of various bottles, barrels and bags. ★ All stainless steel material, can be equipped with feeding machine automatic feeding ★ Photoelectric induction cutting, but also can be equipped with foot switch cutting material. , to meet a variety of accuracy requirements ★ filling motor speed is adjustable to meet the requirements of various materials
Installation instructions:
1. The packaging machine and product conveyor are connected to a 220VAC power supply with leakage protection above 10A;
2. The automatic hoist is connected to a three-phase 380VAC power supply with more than 10A with leakage current and phase loss protection;
3, please don't forget to install the ground wire;
4. Connect the air source to the triple inlet of the packaging machine;
5. The material is sent into the large hopper at the top of the packing machine with a hoist;
6, the date of installation print ribbon;
7, packaging film installation
Equipment maintenance
1. Before and after starting the machine, the inside and outside of the machine must be cleaned, and parts passing through the food must be strictly disinfected.
2. Check whether the oil level of the gas source triplet oil storage tank is maintained at more than 1/3, if less than 1/3, before entering or leaving work every day, then inject 20# pure oil into the tank about 1/2.
3. Before starting the machine every day, fill the oil cup on the horizontal sealing bracket with a full 20# oil.
4. Unloaded packaging film should be taken off work, so as not to bend the support tube.
5. If any material is found in the longitudinal seal or the transverse seal during the opening machine process, the machine must be shut down immediately and use a copper wire brush to clean the longitudinal seal or transverse seal tooth surface.
