Guillotine Shear Machine / Cutting Machine / Hydraulic Shear Machine QC12K-6X3200

HS Code: 8462399000

Vulcanising Press,Automatic Pneumatic Vulcanizing Machine,Automatic Vulcanizing Machine,Electric Vulcanizing Machine,Hydraulic Vulcanizing Machine

Production Details:

This shearing machine we also call swing beam shear machine. The machine is hydraulically powered or mechanically. It works by first clamping the material with a ram, A moving blade then comes down across a fixed blade to shear the material.

The workpiece material include aluminum, mild steel, stainless steel, galvanized sheet, iron sheet, and so on.

1.Adjusting of the gap between blades is portable and quick. The value of the gap is indicated on a dial.

2.Adopt advanced hydraulic system, reliable and easy for maintenance.

3.Meet with international safety standard.

4.Frame welded, vibration to eliminate stress, high in rigidity, sturdy and durable. Hydraulic drive, swing beam, return of knife beam is smooth and prompt by accumulator or nitrogen cylinder, stead&reliable performance.

5.The position of low blade can be adjusted to ensure the equilibrium of the gap after regrinding. The portable and prompt adjusted of the blade's gap, the value of gap is indicated by dial, positioning reliable.

6.The digital display devices used to the back gauge's value and the shearing times are on the front of the machine.

1. Standard Equipment:
Estun E21sNC control SystemPowered Back gaugeX-axisDELTA Inverter controlled back gaugeHIWIN Ball screws & Polished rod with 0,05mm accuracy.Squaring Arm and Front Support ArmsGermany Bosch-Rexroth HydraulicGermany EMB Tubing connectorGermany Siemens Main MotorTele mecanique/Schneider ElectricsHydraulic &Electrical overload protectionCutting Line Illumination and wire for shadow line cuttingTop blade with four cutting edges and bottom blade with four cutting edges.(6CrW2Si)
 
2. Safety Equipment:
Safety Standards(2006/42/EC):
1.EN 12622:2009 + A1:2013
2.EN ISO 12100:2010
3.EN 60204-1:2006+A1:2009
Front finger Protection(Safety light curtain)South Korea Kacon Foot Switch(Level 4 of safety)Back metal safe fence with CE standardsSafety relay with Monitor the pedal switch and safety protection
 
3. Estun E21s NC Control system:
Backgauge controlControl for general AC motors,frequency inverterIntelligent positioningDouble programmable digital outputStock counterProgram memory of up to 40 programs Up to 25 steps per programOne side positioningRetract functionOne key backup/restore of parametersmm/inchChinese/English


Shearing machine specifications


FAQ